Tammy Delacruz. Door Hinges. November 21st , 2017.
Selecting the what you need is easy. Measure the old door that you are taking out of this space and write those measurements down. When it comes to selecting door hinges, consider what this door will be asked to do. If the door is going to get a lot of use you may want to use three 3-inch door hinges to make sure its sturdy and will hold in place. This is especially the case if it is an exterior door. One way to tell what kind of door hinges to choose is to look at what was being used on the door you are removing.
Most doors today are sold pre-hung, with hinges on them, when you get a new door it usually comes with factory standard door hinges. If you are remodeling you want to make sure the new door hinges fit the style of all the other ones in the house. Thankfully they are easy to swap out. The holes for door hinges are usually standard as long as you buy the same size that you had previously. The door hinges you have will likely have either two or three holes. How you change the door hinges depends on which style you have.
Another way to tell if it is a good idea to replace your doors with pre-hung replacements is if the rest of the doors already cant in their frames. You can square them yourself, but if you are planning to replace these doors, go for the pre-hung. They take much less time to replace and come in pre-finished or raw wood. One last thing, is your door a left- or right-hanging door? Hmmm...you think for a minute. Nope, you are sure you havent heard that one. Dont worry its easy. When you are buying any type of hinged door; storm door, entry door, and even cabinet doors, OR when you are buying hinged door hardware; hinges especially and sometimes latches, the salesperson will eventually ask you whether it is a right- or left-hanging door. The way you figure it out is, when you pull open the door; does it open to your left or to your right? Whichever way it opens is the answer.
Another related lefty-righty question is: Does it really matter if you mix up right- and left-hanging cabinet door hinges? Not usually. Most door and cabinet door hinges can masquerade as each other if you rotate them 180°. The pins will drop in the same way and everything. In rare cases, the pin only goes in one way, the cabinet door hinges plate is shaped or decorated to only look right on its right (or left!) side. If in doubt, ask a contractor or cabinetmaker. Tip: If you are going to take your old doors or cabinet doors off, refinish them, and put them back on, I suggest labeling each of the cabinet door hinges as you take them off. In your kitchen for example, the top left-hanging hinge on the first cabinet on the east side of your kitchen could be marked: TLE1. That way everything will line up exactly as it did before you took them down.
By and large one of the most important inventions for everyday use isnt very large at all. Because of cabinet door hinges we are able to store things away behind doors that previously would have been on shelves. Although originally used in 1600 B.C., the Romans adapted the hinge for home use. Flash forward to the American colonies and hinges were used everywhere. Eventually they were outfitted for the doors of wagons heading west most prominently by Charles Hager in St. Louis. He founded the present day Hager Hardware Company and in the 1900s received a patent for the compact butt hinge and the rest as they say is history.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does NewsPressRelease claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.