Door Locks. Monday , December 11th , 2017 - 03:50:03 AM
Sometimes, it is combined with the bolt lock to add to the safety. They serve the same purpose and the same limitations. This will not be a practical solution for you to eliminate thieves coming into your house. You want a more secured door lock. You may also notice from different homes that you visit the hole to hole lock. This is often used in business establishments. The only thing that makes this different is that it is used with padlocks. There should be a hole in the wall and the door. Oftentimes, there is a metal piece attached to the door for it to have a hole that will look the same with the hole in the wall. The padlock will be inserted in both of the holes for it to be secured. This does not really give good security because a padlock may easily be destroyed by thieves. The next thing that will be introduced is the dead bolt lock.
Another important thing you need to do before buying this type of door lock is to make sure whether your door is left-handed or right-handed. Also, note the depth of the door to make sure that your new deadbolt door lock will fit the door for proper work. Thirdly, remove your old door lock by removing the screws which are securing it by using the screwdriver. Most models of deadbolt lock have six screws. While removing your old lock, note how it is assembled. Fourthly, test the assembly of your new deadbolt lock. Make sure that your new lock can fit into knob hole as well as the latch area in your door. If it cannot fit into knob hole, you should increase it by using the file. In addition, you can increase the lock if latch hole is too small. Then, make sure that it is level with the door edge. If not, you can use the wood chisel to fix it. Also, ensure that the two sides of your lock have been properly aligned for proper work. However, different models may need different steps. You can see it in the instructions. Fifthly, secure your deadbolt lock. By using the screws, tighten those two sides. After you have assembled the new one, make sure that it is able to work properly by testing the key either from the inside or outside.
Stanley Aluminum Deadbolt Lock & Key Cylinder This deadbolt lock, also available at hardwarestore.com, is ideal for garage doors that have locking hubs. Its key cylinder lock has a solid tumbler and it replaces most overhead garage door locks made of steel or wood. All its parts, including the mounting hardware, fasteners and plates are all made of metal. National Hardware Deadbolt V7651 Garage Door Lock This aluminum deadbolt lock, available at shop.com, is resistant to burglar attacks because the two-inch lock cylinder is installed on the outside while the lock body is installed on the inside, making a rectangular notch in a locking bar assembly which is 3.5-inch long. It is in chrome finish and weighs 0.75 pounds. On the whole, the best garage door locks are the ones that work with your other door hardware, that fit the type of your garage door and that are strong enough to resist attacks and severe weather.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does NewsPressRelease claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.