Door Locks. Wednesday , December 13th , 2017 - 03:00:01 AM
This power-using lock, also available at axxisbiometrics.com, is one of Axxis biometric fingerprint door locks that use a sliding cover that acts as protection for the sensor and the lock and acts as a switch to turn on the digital scanner to accept your fingerprint and grant entry. It also offers pin code access and override key options. Axxis Biometrics BD1-HS Biometric Fingerprint Deadbolt This is the Axxis lock rated by Good Housekeeping as one of its best biometric door locks. It incorporates an enhanced motor, an ANSI Grade 1-rated deadbolt and a keyway resistant to bumping, picking or drilling. Just like other Axxis biometric locks, the sensor is also protected with a sliding cover. Other Axxis models have remote control devices. To enable you to focus on looking at lock style and finish, look for lock brands that have proven performance through the years. These brands have experience, research and technology that back the quality of their biometric door locks.
Of course, this is not the type of door lock that you want for a typical home. Same with what was mentioned, you can choose from a variety of door locks. You can find the regular lock. This is the most common and the simplest type of door locks. When using this, you have to install the part of it, which has a hole, on the wall closest to the door and the bolt on the swinging part of it. You have to put them at the exact horizontal position. The problem with this door lock is that it can only be opened and closed from the inside. Keys cant be used with them. This is why there will be no chances for you to come in when it is locked. It is useless when a family wants to go out because the entire home will be very wide open to thieves. The same goes with the chain lock. The only difference with this is that a chain is used instead of the "hole" installed in the wall.
Another important thing you need to do before buying this type of door lock is to make sure whether your door is left-handed or right-handed. Also, note the depth of the door to make sure that your new deadbolt door lock will fit the door for proper work. Thirdly, remove your old door lock by removing the screws which are securing it by using the screwdriver. Most models of deadbolt lock have six screws. While removing your old lock, note how it is assembled. Fourthly, test the assembly of your new deadbolt lock. Make sure that your new lock can fit into knob hole as well as the latch area in your door. If it cannot fit into knob hole, you should increase it by using the file. In addition, you can increase the lock if latch hole is too small. Then, make sure that it is level with the door edge. If not, you can use the wood chisel to fix it. Also, ensure that the two sides of your lock have been properly aligned for proper work. However, different models may need different steps. You can see it in the instructions. Fifthly, secure your deadbolt lock. By using the screws, tighten those two sides. After you have assembled the new one, make sure that it is able to work properly by testing the key either from the inside or outside.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does NewsPressRelease claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.