Tammy Delacruz. Door Hinges. November 23rd , 2017.
If you are replacing three-hole door hinges, you should start by putting in the middle screw first, then put in the bottom screw. Finally you should put in the top screw. If you repeat this on both the top and bottom of a cabinet door you will be able to keep your door in alignment. If you have two-hole door hinges things can get a little trickier. The easiest way to do them is to have someone help you. Their job will be to hold the door in place while you put the screws in. You can also balance the door on something while you put the screws in. But, this can be a little frustrating if the door moves or shifts before you get both screws in place.
The easy way to install the door and door hinges is to install the new door hinges where the old ones were. This only works if you selected the same size door hinges as you previously had on the door with proper hole-spacing. If not, you may have to use some wood putty to fill the old holes, and then put the new hinges wherever you would like. When deciding where the door hinges will go remember, doors are supposed to open into the room, they are also traditionally expected to open to a wall, not to flap in the open area of the room. If you have someone handy, you may want to bring them into play at this time. Line up the door where you think it should be placed, using shims to balance it off the ground enough that it will open and close.
By and large one of the most important inventions for everyday use isnt very large at all. Because of cabinet door hinges we are able to store things away behind doors that previously would have been on shelves. Although originally used in 1600 B.C., the Romans adapted the hinge for home use. Flash forward to the American colonies and hinges were used everywhere. Eventually they were outfitted for the doors of wagons heading west most prominently by Charles Hager in St. Louis. He founded the present day Hager Hardware Company and in the 1900s received a patent for the compact butt hinge and the rest as they say is history.
Selecting the what you need is easy. Measure the old door that you are taking out of this space and write those measurements down. When it comes to selecting door hinges, consider what this door will be asked to do. If the door is going to get a lot of use you may want to use three 3-inch door hinges to make sure its sturdy and will hold in place. This is especially the case if it is an exterior door. One way to tell what kind of door hinges to choose is to look at what was being used on the door you are removing.
Whether its because your door is old and no longer works with your décor, or you want something a little more flashy in the space, trading out doors and door hinges is not too difficult of a job. Dont think you can do it? Think you need a lot of tools to get the job done? Think again. All you need is a few shims, or thin pieces of wood that can be slipped under the door to hold it at the right height, nails or an electric screwdriver and the door and door hinges. Here are the steps for taking on the installation process.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does NewsPressRelease claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.