Tammy Delacruz. Door Hinges. November 24th , 2017.
The easy way to install the door and door hinges is to install the new door hinges where the old ones were. This only works if you selected the same size door hinges as you previously had on the door with proper hole-spacing. If not, you may have to use some wood putty to fill the old holes, and then put the new hinges wherever you would like. When deciding where the door hinges will go remember, doors are supposed to open into the room, they are also traditionally expected to open to a wall, not to flap in the open area of the room. If you have someone handy, you may want to bring them into play at this time. Line up the door where you think it should be placed, using shims to balance it off the ground enough that it will open and close.
You should put the first screw in at this point, at the top of the door. Make sure someone is holding up the weight of the door (or keep it on shims) so the weight doesnt pull that screw out. Close the door and make sure it shuts properly. It should be hitting the strike plate evenly. If not, adjust the shim placement until you have even amounts of space all the way around and the door seems to be evenly set. Immediately put a screw in the bottom door hinges. This will make sure you have the door hinges lined up in a manner that will allow the door to open and close correctly.
Theyre small and inconspicuous, but they really hold a room together. No they are not throw pillows or candles. They are door hinges and they are in every room of your house. From the refrigerator to the cellar door you use them every day. Sure you dont really think about them, but can you imagine what life would be like without them? Your front door might be a large rock or chunk of wood. Or if you are not strong enough to move one of those you would climb a ladder and enter your home through the roof.
If you have an overlay door you will need pivot hinges. One is attached to the top and the other to the bottom of a door, and portions of each are recessed into the door and frame creating a concealed hinge. Flush doors commonly use butterfly hinges. These hinges are so named because they look like a butterfly when opened. They consist of two flaps with screw holes held together by a pin. They mount on the outside of the door and jamb or frame for a unique decorative look. Youll find them in multiple styles ranging from colonial to art deco and beyond to suit your personal taste.
If you have concealed hinges and want to move to surface mounted cabinet hinges, chances are good that youll want to go with either semi-concealed hinges where only the frame wing is visible (the door part goes on the back side of the cabinet door), overlay hinges, or inset hinges. It just depends on the type cabinet doors you have. Before you redo all your hinges buy several different styles and finishes and put them on them in various parts of the kitchen. You can then get a sense of which works best for you from the standpoint of design and décor before going through the effort of replacing all the cabinet door hinges in the home.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does NewsPressRelease claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.