Door Locks. Monday , December 11th , 2017 - 03:48:22 AM
Deadbolt door lock is widely used for home security system today. It is one of the best devices you can use to secure your door since it is able to provide higher protection than the regular deadbolt lock. If you want to replace your old deadbolt lock with the new one, there are some procedures you have to follow. Here are some steps to replace the door lock for you. Firstly, you need to prepare the tools you will need to help you do your task. The tools include the Phillips screwdriver, flat tip screw driver, file, 3/4 inch wood chisel, and hammer. Secondly, purchase the right deadbolt door lock. Since there are a lot of types available on the market, it will be better for you to go for the same brand and the same model as your old deadbolt lock. It will make your task easier since you dont have to redrill your door for new hole to fit your new lock. It will be able to fix to the existing hole in your door.
By having 2 security solutions on your garage, crooks must cut through two times as many safety devices. Additional Door Bolts Finally, to guarantee garage security through garage doors, you could connect additional bolts to the garage door. With this particular way, crooks cannot simply intrude your garage area simply because they should cut through a lot of door points. Some men and women pick this choice rather than a locking bar just like a bulldog bar since extra bolts could be connected to the same garage handle, making it faster and easier to open the lock. Meanwhile, a door bar needs to be removed separately and stowed away when the garage area is in use. Clearly this isnt a choice for seniors with mobility problems. Which Option You Need to Choose Every scenario will demand a different type of lock. As you pick the perfect option, you need to consider your spending budget and needs. Also, it is necessary to consider what you need to put in your garage. If its a nice vehicle, wouldnt it be cash wisely spent ensuring your pride and joys security?
Another important thing you need to do before buying this type of door lock is to make sure whether your door is left-handed or right-handed. Also, note the depth of the door to make sure that your new deadbolt door lock will fit the door for proper work. Thirdly, remove your old door lock by removing the screws which are securing it by using the screwdriver. Most models of deadbolt lock have six screws. While removing your old lock, note how it is assembled. Fourthly, test the assembly of your new deadbolt lock. Make sure that your new lock can fit into knob hole as well as the latch area in your door. If it cannot fit into knob hole, you should increase it by using the file. In addition, you can increase the lock if latch hole is too small. Then, make sure that it is level with the door edge. If not, you can use the wood chisel to fix it. Also, ensure that the two sides of your lock have been properly aligned for proper work. However, different models may need different steps. You can see it in the instructions. Fifthly, secure your deadbolt lock. By using the screws, tighten those two sides. After you have assembled the new one, make sure that it is able to work properly by testing the key either from the inside or outside.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does NewsPressRelease claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.