Tammy Delacruz. Door Hinges. November 21st , 2017.
There are several types of door hinge available. The most common is the butt hinge. This consists of two flaps with screw holes attached by a pin or a rod. To take the door down all you would have to do is remove the pins. You can choose to add finials or balls to the pins for a decorative touch. Garage doors are usually attached with T-hinges. Shaped like the letter T the horizontal part is attached to the door frame while the vertical part is attached to the door. These hinges can be plain or ornamental and lift up rather than out. If you have folding doors you might use a Soss hinge. Named for its inventor this door hinge is recessed into the door edges so when the door is folded it is completely concealed. It must be installed exactly or it will not work.
If dealing with cabinet doors the type of hinge you use will depend on the door type. There are three door types; lipped, flush and overlay. A lipped door has a lip cut around it and works well with most hinges. A flush door rests within the frame and works well with butterfly hinges. A butterfly hinge works like a butt hinge but is hung on the outside and is more ornamental ranging in styles from colonial to art deco. The pivot hinge is made for overlay doors. One is mounted on the top and the other on the bottom with portions of each bent over and mounted to the frame and door resulting in a concealed hinge. Perhaps the most popular hinge is the spring mounted hinge. Fitted with a small spring inside this door hinge allows the door to close on its own, automatically.
A room is not a room without a door and door hinges. If there were no hinges you would have either a wall or a hole in the wall. Without door hinges there would never have been the song lyrics nobody knows what happens behind closed doors", because doors couldnt have closed in order for secret things to happen behind them. You must be thinking there had to be something that was used before the shift was made to what we today know as door hinges. You would be right. What was around before hinges was portiers. These were large tapestries that were hanging in front of a big hole in the wall. They would block the entryway to a room and had to be pushed out of the way every time you wanted to go in or out.
When it comes to cabinet door hinges the right ones depend on the type of door you have. Basically there are three types of doors lipped, overlay and flush. The lipped door is one in which a lip has been cut completely around the door. The overlay door is cut larger than the opening so that its edges rest on the door frame. Flush doors sit inside the frame with their faces flush within it. Each type of door dictates different types of hinges. Pivot hinges, one of the most popular styles, are designed for overlay doors. One hinge is mounted on top the other on the bottom with portions of each screwed into the frame resulting in a concealed hinge.
You can solve the problem by doing just that, adding a third door hinge to relieve some of the stress. Remember, you want substantial hinges. These items will be getting a work out day after day in your home, and you want ones that will hold up to the test of time. You get what you pay for, so you may want to pay for more door hinges that will do the job you need them to get done, and do it right.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does NewsPressRelease claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.