Tammy Delacruz. Door Hinges. November 26th , 2017.
Similar to the butt hinge but used only on flush doors; doors that rest within the frame, are butterfly hinges. These cabinet door hinges are also constructed with two flaps with screw holes held together by a pin. The difference is these hinges are mounted on the outside of the door and frame giving your cabinet a decorative touch. They are available in several styles to suit your taste ranging from colonial to art deco and more.
Eventually the Romans adapted the hinge from the large sizes used for city gates to a smaller size to use in the home. So, now we have the cabinet door hinge. Available in a vast array of styles and finishes the cabinet door hinge is an important part of any décor. Dont get frustrated bouncing from store to store like a pinball to find the hinges you need. Instead shop online and youll find the best selection as well as the best prices. Typically the type of cabinet door hinge you need is dictated by the type of cabinet door you have. There are three types of cabinet door; lipped, flush and overlay. A lipped door has a lip cut all the way around it. A flush door rests within the door frame and an overlay door rests on the door frame.
When it comes to cabinet door hinges the right ones depend on the type of door you have. Basically there are three types of doors lipped, overlay and flush. The lipped door is one in which a lip has been cut completely around the door. The overlay door is cut larger than the opening so that its edges rest on the door frame. Flush doors sit inside the frame with their faces flush within it. Each type of door dictates different types of hinges. Pivot hinges, one of the most popular styles, are designed for overlay doors. One hinge is mounted on top the other on the bottom with portions of each screwed into the frame resulting in a concealed hinge.
Unlike the old days when door hinges were made of iron, brass or steel, todays hinges come in an array of materials and finishes. Thanks to modern manufacturing techniques, most of these finishes are maintenance free. Left alone, they wont tarnish, rust or fail over time. What do begin to fail are the screws that hold the door hinges on the door and the frame. The stresses and strains of everyday openings begin to loosen the screws. This is particularly true on heavier doors that are either left open a lot or bear lots of traffic.
You should put the first screw in at this point, at the top of the door. Make sure someone is holding up the weight of the door (or keep it on shims) so the weight doesnt pull that screw out. Close the door and make sure it shuts properly. It should be hitting the strike plate evenly. If not, adjust the shim placement until you have even amounts of space all the way around and the door seems to be evenly set. Immediately put a screw in the bottom door hinges. This will make sure you have the door hinges lined up in a manner that will allow the door to open and close correctly.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does NewsPressRelease claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.