Door Locks. Monday , December 11th , 2017 - 03:19:28 AM
Another important thing you need to do before buying this type of door lock is to make sure whether your door is left-handed or right-handed. Also, note the depth of the door to make sure that your new deadbolt door lock will fit the door for proper work. Thirdly, remove your old door lock by removing the screws which are securing it by using the screwdriver. Most models of deadbolt lock have six screws. While removing your old lock, note how it is assembled. Fourthly, test the assembly of your new deadbolt lock. Make sure that your new lock can fit into knob hole as well as the latch area in your door. If it cannot fit into knob hole, you should increase it by using the file. In addition, you can increase the lock if latch hole is too small. Then, make sure that it is level with the door edge. If not, you can use the wood chisel to fix it. Also, ensure that the two sides of your lock have been properly aligned for proper work. However, different models may need different steps. You can see it in the instructions. Fifthly, secure your deadbolt lock. By using the screws, tighten those two sides. After you have assembled the new one, make sure that it is able to work properly by testing the key either from the inside or outside.
Of course, this is not the type of door lock that you want for a typical home. Same with what was mentioned, you can choose from a variety of door locks. You can find the regular lock. This is the most common and the simplest type of door locks. When using this, you have to install the part of it, which has a hole, on the wall closest to the door and the bolt on the swinging part of it. You have to put them at the exact horizontal position. The problem with this door lock is that it can only be opened and closed from the inside. Keys cant be used with them. This is why there will be no chances for you to come in when it is locked. It is useless when a family wants to go out because the entire home will be very wide open to thieves. The same goes with the chain lock. The only difference with this is that a chain is used instead of the "hole" installed in the wall.
Choose a lock able to work with your existing automatic door closer, remote control device and alarm systems. For safety purposes, make sure that your automatic closers have safety mechanisms that enable them to reverse and stop if they are obstructed. Before installing door locks, make sure that the garage door, hinge mechanisms, rollers, tracks are working properly. See to it also that your door handles, lever, pulls and bells are installed correctly, not only for aesthetics purposes but for convenience. Here are some door locks that you can check out: Keyed Cylinder T-Handle Lock in Chrome This is an all-metal garage door lock from Prime Line, available at hardwarestore.com. It is used together with an interior Swivel Lock Handle or a locking hub and it can replace most overhead sectional steel or wood garage doors keyed with T lock handles. This lock can also be used on doors of mobile homes and recreational vehicles.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does NewsPressRelease claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.